tension test

英 [ˈtenʃn test] 美 [ˈtenʃn test]

网络  拉伸试验; 拉力测试; 抗拉试验; 拉力试验; 拉伸测试

化学



双语例句

  1. Using scaling tension test method simulated the effect of leveling elongations on yield strength ratio of hot dip galvanized dual phase steels.
    研究了氮含量对热镀锌双相钢拉伸性能的影响,用定拉伸试验方法模拟了平整伸长率对热镀锌双相钢屈强比的影响。
  2. The process accuracy was validated by the uniaxial tension test.
    同时利用拉伸试验验证该方法的准确性。
  3. Force and deformation of ring specimen during hoop tension test were analyzed.
    通过等宽试样和标距试样拉伸实验,对理论分析结果进行了验证。
  4. By comparing with common tension test, the amount of test can be lessen largely;
    与常规的拉伸、压缩试验相比,可大大地减少试验工作的工作量;
  5. The relationship between the tensile stress and the tensile strain at the initial of a tension test has been experimentally determined and analyzed.
    本文对电流变液的直流高压电场作用下,小应变范围内的拉伸应力应变过程进行了测试和分析。
  6. To prove the shock when rolling tension begins to be built, a load sensor is located in the midst of work pieces between two stands to do the tension test when the loop has being absorbed.
    为证明张力建立初期存在冲击,在两架连轧机轧件中间接入力传感器,进行连轧活套吸收后建立张力的试验。
  7. In this paper, the data acquisition and data processing of a microcomputer equipped tension test are presented.
    在拉伸试验中利用微机进行数据采集和数据处理,从而达到对该常规试验测试现代化的目的。
  8. Research on Tension Control System in Fiber Winding and Placement and Design of the Tension Test Platform
    纤维铺缠设备中张力控制器及张力测试台研究
  9. A New Method for Uniaxial Tension Test of Polyester Cord
    一种聚酯帘线单向拉伸试验的新方法
  10. In the first part of the experiment, students will subject an ordinary steel reinforcing rod to a tension test using a testing machine designed specifically for that purpose.
    在第一部分,学生要用为此特制的实验仪器对一根普通预应力钢杆做拉力实验。
  11. Finally, the new system model is validated by a set of uniaxial tension test data of concrete, which had been performed by authors in the laboratory.
    最后,通过在实验室完成的一组混凝土单轴拉伸试验验证了这个系统模型的合理性。
  12. The structure of acidic components and its contribution to emulsification in basic water were investigated by element analysis, infrared spectrum, interfacial tension test and emulsifying ability test.
    通过元素分析、红外光谱、界面张力和乳化能力测定考察了超稠油中酸性组分的结构及其在碱水中对乳化的贡献;
  13. In addition, uniaxial tension test fails to accurately reflect the complex stress state of tube plastic forming.
    单向拉伸试验也不能精确反映管材在实际塑性成形中所处的复杂应力状态。
  14. This paper aimed at acquiring the real interlaminar shear strength in tension test.
    在拉伸负荷方式下,层间剪切强度的测定受弯曲力矩的影响。
  15. Secondly, it is introduced that a new applied standard metal mold tension test specimen is designed.
    介绍了一种新的实用标准金属型抗拉试样。
  16. The tension test at room temperature is used to study the size effect of thin copper sheet with different crystal size, different thickness and different strain rate.
    对所制备的薄铜板进行了室温拉伸实验,研究薄铜板在不同晶粒大小、不同板厚和不同应变速率下的尺寸效应。
  17. Methods: Tension test machine and microhardness tester were used.
    方法:用拉力机、显微硬度机测试。
  18. It is put forward that the analysis method of fracture surface of metallic tension test specimen is available.
    提出的金属拉伸试样断口分析方法是可行的。
  19. In this paper, the basic mechanical behavior of Yitong concrete masonry adopting special paste has been studied by the analysis of 12 test of axial bearing and eccentric bearing, 18 tension test of bending, and 9 shearing test of through suture masonry.
    本文通过对伊通加气混凝土砌体12个轴压和偏压试验、18个弯曲抗拉试验和9个通缝抗剪试验的结果进行分析,研究了采用专用粘结剂砌筑的伊通加气混凝土砌体的基本力学性能。
  20. By the triaxial tension test, there are three different failure forms of the samples under different consolidation pressure.
    三轴拉伸试验发现,随着围压σ1的变化,试样有三种不同的破坏形式:纯拉断、先剪切伸长后拉断和纯剪切。
  21. The micro-yield strength after different stabilized treatment and dimensional stability in thermal cycling conditions of SiCP/ 2024Al composites were measured by tension test and dilatometer.
    利用万能拉伸试验机和热效应自动分析仪测试了SiCP/2024Al复合材料在不同稳定化工艺处理后的微屈服强度和热循环条件下的尺寸稳定性;
  22. Through the analysis on the axial tension test results of steel fiber reinforced concrete, this paper explores steel fiber volume ratio and concrete strength grade upon the axial tension initial cracking strength.
    通过对钢纤维混凝土轴拉试验结果的分析,研究了钢纤维体积率、混凝土强度等级对钢纤维混凝土轴拉初裂强度的影响。
  23. To determine the lift device selection, a rotor tension test platform is made.
    为确定升力装置的选型,设计了旋翼拉力测试平台,通过多次试验,得出电机/旋翼的最佳工作区间。
  24. The free vibration theory of cable is the theory basis of cable tension test and calculation.
    索的自由振动理论是索力测试和计算的理论基础。
  25. A new method of fiber/ droplet tension test was developed to study the stress transfer behavior of the fiber interface, especially fiber coating stress transfer.
    其次,发展了纤维/微滴拉仲测试新方法来研究界面上的应力传递行为,特别探讨了纤维涂层对应力传递的影响。